Emery meaning of name: Baby Name Meaning, Origin and Popularity

Posted on by alexxlab

Emery | Kidadl

Emery | Kidadl

Recent searches (0)

    Discover the origin, meaning and pronunciation of the name Emery.

    Gender
    Spelling of Emery
    Origins of Emery
    Locations Featuring Emery
    Songs About Emery

    Emery is a name with Old English origins. The meaning of Emery is ‘indsutrious’. It is a name that can be found in the Bible, meaning ‘home power’. It is traditionally considered by parents looking for a name for their baby boy. The name Emery also has Old Germanic roots, taken from the first name Emaurri. This was made up of the word element ‘amja’, which meant ‘busy’ or ‘industrious’ and ‘ric’, which meant ‘power’. The name was first brought to England by the French Normans during the Norman invasion of 1066. It later found its way to the United States, where it became popular predominantly as a boy’s name. One of the famous personalities with this name is Emery Barnes. He was a Canadian professional football player and athlete, then he became a politician. He was so well-liked that there was a city park in Vancouver that was named the ‘Emery Barnes Park’ in his honor. There was also Emery Walker, who was known for his work as an artist, using engraving, photographs and prints. As a last name, Emery was used by George Washington Emery Dorsey, a former representative in the United States Congress from Nebraska.

    english

    Locations featuring Emery

    The Emery Theatre

    1112 Walnut Street, Cincinnati, Ohio 45202, United States

    Emeryville

    California, United States

    The Emery/Weiner School

    9825 Stella Link Rd, Houston, Texas 77025, United States

    Emery’s

    289 Long Swamp Rd, New Egypt, New Jersey 08533, United States

    Search Baby Names Directory

    By Gender

    All gendersBoysGirlsGender Neutral

    By Origin

    All originsAboriginalAfricanAkkadianAlbanianAlgonquinAmericanAnglo-SaxonArabicAramaicArmenianAssyrianAustralianAztecBahamianBasqueBritishBulgarianCambodianCanadianCatalanCelticChineseCornishCroatian CzechDanishDutchEgyptianEnglishEstonianEthiopianEuropeanFarsiFijiFinnishFrenchFrisianGaelicGermanGreekGuyanaHawaiianHebrewHindiHungarianIcelandicIncanIndianIndonesianIranianIrishIsraeliItalianJamaicanJapaneseJewishKoreanKurdishLatinLatin AmericanLatvianLithuanianMacedonianMaoriMayanMexicanMongolianNative AmericanNigerianNordicNormanNorseNorwegianOld EnglishOld GermanOld High GermanOld NorsePersianPhoenicianPolishPortugueseRomanRomanianRomanshRussianSanskritScandinavianScottishScottish GaelicSerbianSinhalaSlavicSlovakianSomaliSpanishSumerianSwahiliSwedishSwissTahitianTamilThaiTurkicTurkishVietnameseWelshXhosaYiddish

    By Name

    Popular:

    Strong Baby Names For Girls,Hebrew Baby Names

    Browse By Letter

    Name origin

    • Aboriginal
    • African
    • American
    • Arabic
    • Armenian
    • Aboriginal
    • African
    • American
    • Arabic
    • Armenian
    • Aboriginal
    • African
    • American
    • Arabic
    • Armenian
    • African
    • American
    • Arabic
    • Armenian
    • Aboriginal
    • African
    • American
    • Arabic
    • Armenian
    • Aboriginal
    • African
    • American
    • Arabic
    • Armenian

    ;

    You might also like

    Alasne

    Matthéo

    Thimoté

    Briona

    We’ll send you tons of inspiration to help you find a hidden gem in your local area or plan a big day out.

    Check your inbox for your latest news from us. You have subscribed to:

    • Days Out
    • Best Buys
    • Weekly Catch-Up

    Remember that you can always manage your preferences or unsubscribe through the link at the foot of each newsletter.

    Emery | Oh Baby! Names

    Skip to content

    Etymology & Historical Origin of the Baby Name Emery

    Emery is the transferred use of an English surname of Norman French origins with roots in the Germanic language. The surname derives from an ancient Germanic personal name “Amalric” from the elements “amal” (meaning ‘bravery’) and “rīc” (meaning ‘powerful’). The French brought the name to England after the 11th century Norman Invasion where it was anglicized to Emmeric and eventually to Emery by the 13th century. Emery has been used as a first name for boys since the 19th century. Today the name is considered unisex.

    All About the Baby Name – Emery

    Personality

    OF THE BOY NAME EMERY

    The Three energy is powerful and enthusiastic. These personalities are cheerful, full of self-expression, and often quite emotional. They have an artistic flair and «gift-of-gab» that makes them natural entertainers. Their joyfulness bubbles over, and their infectious exuberance draws a crowd. The Three personality is like a child — forever young and full of delight. They are charming, witty, and generally happy people. The Three personality lives in the «now» and has a spontaneous nature. Threes seem to live with a bright and seemingly unbreakable aura that attracts others to them. In turn, they are deeply loyal and loving to their friends and family. Luck also has a tendency to favor number Threes.

    Popularity

    OF THE BOY NAME EMERY

    While more popular for girls than for boys in the 21st century America, the name Emery dates back much farther on the charts as a male name. The boy version of Emery has been in use since at least 1880 (the first year the U.S. government began tracking naming trends). Back at the turn of the 20th century, Emery enjoyed relatively moderate usage, but as the decades progressed the name waned in favor. By the late 1970s, the name Emery completely disappeared off the male charts. Enter 2005 and enter Emery for girls. This is the year that the female version of the name debuted on the girl’s naming charts. Interestingly, Emery name has been far more successful with a dress on. The name climbed over 500 positions on the female charts in five short years. Having come back into popular use, parents of little boys stood up and took notice. In 2007, Emery reappeared on the male naming charts for the first time in about 30 years. However, it’s still nowhere as successful as his female counterpart, Emery is officially unisex. American parents love these androgynous surnames for their little girls, but we have to admit, it’s a pretty darn cool name for a little girl. Much more ‘powerful’ than the other popular surnames for girls such as Haley, Riley, Bailey or Marley. Emery gets our vote.

    Quick Facts

    ON EMERY

    GENDER:

    Boy

    ORIGIN:

    English

    NUMBER OF SYLLABLES:

    3

    RANKING POPULARITY:

    741

    PRONUNCIATION:

    EM-ə-ree

    SIMPLE MEANING:

    Bravery, power

    Characteristics

    OF EMERY

    Communicative
    Creative
    Optimistic
    Popular
    Social
    Dramatic
    Happy

    Cultural References to the Baby Name – Emery

    Literary Characters

    OF THE BABY NAME EMERY

    Enoch Emery is a character in Flannery O’Connor’s first novel, Wise Blood, published in 1952. The plot involves the return of a World War II veteran who forms an atheistic ministry in a small Southern town. He meets Enoch, who is a certifiably crazy eighteen year old who has been kicked out of the house by his unloving father. Enoch introduces the protagonist to the concept of “wise blood”, the notion that he has innate knowledge of the direction one’s life should be taking. Enoch is a sad character, disenfranchised, and really caring only about “Gonga the Gorilla” of movie fame. When he sees a man in a gorilla suit promoting a coming film at the theater, Enoch kills the man, steals the suit, and finds his true identity. Still unaware of his negative impact on the rest of humanity, Enoch is now fulfilled – his “wise blood” has led him to his true identity. It is redemption of a sort.

    We cannot find any significant literary characters by the name of Emery

    Childrens Books

    ON THE BABY NAME EMERY

    We cannot find any childrens books with the first name Emery

    Popular Songs

    ON EMERY

    We cannot find any popular or well-known songs with the name of Emery

    Famous People

    NAMED EMERY

    Emery Moorehead (football player)
    Emery Moorehead (football player)
    Emery Moorehead (football player)

    Children of Famous People

    NAMED EMERY

    Angie Harmon;

    Historic Figures

    WITH THE NAME EMERY

    We cannot find any historically significant people with the first name Emery

    Explore Our Products

    Explore Our Products

    Newsletter Sign Up

    Get our latest offers and news straight in your inbox

    How to make your own rubber mallet.

    Carved hammer handle with your own hands The purpose of the locksmith’s hammer

    Durable, able to withstand great impact force and at the same time rubberized on the outside of the hammer, it is easy to do it yourself. The mold for casting it is done elementarily, and the materials you will need will be quite affordable. The step-by-step process of making a concrete hammer with your own hands is outlined and clearly demonstrated below.

    Materials

    Before you make your own hammer, make sure you have:

    • Lego;
    • concrete mixing solution;
    • epoxy resin solution;
    • wooden handle;
    • sharp knife or screwdriver;
    • wood polishing wax;
    • chisels;
    • sandpaper;
    • gloves;
    • corner.

    Step 1
     . From the Lego constructor, assemble a mold for casting the impact part of the hammer. The constructor is good in that its parts fit as tightly as possible to each other, preventing the solution from flowing out through the cracks. The product can be made in any size. In this case, a small hammer was needed. You can change it at your own discretion.

    Step 2
     . Place a wooden handle in the center of the assembled hammer mold. Be sure to make sure that the part of the future tool is strong and not rotten. For the handle, choose strong woods, in this master class it was walnut.

    Step 3
     . Dilute the concrete solution in accordance with the manufacturer’s instructions and pour it into the mold. Make sure that the handle continues to stand strictly upright during the process. Correct it if necessary. Seal the solution with your hands, after putting on gloves. Make sure there are no air pockets. The solution must be packed tightly.

    Step 4
     . After a few hours, disassemble the constructor. Due to the smooth surface of the plastic, the process will go without much effort, but if you doubt that it can be separated from concrete, grease the mold with vegetable oil before casting. Give the material some more time to dry.

    step 5
     . Dilute the epoxy solution. It must be tenacious. Gently apply it with a pencil on the concrete part of the hammer. Leave the product until the materials are completely dry. This process will take about a day.

    All wooden handles for hand tools are made from well-dried birch, including for hammers. For hammers weighing 300-400 grams, a blank of a rectangular bar, 350 millimeters long, with sides 40×30, is enough. Measure the inner throat of the hammer head. After finishing, you should get a bar with sides of approximately 35×25. On one side of the bar, mark the center (with lines from corner to corner). Build a rectangle around this center with sides equal to the hole on the hammer in width and height. Drive the ribs and planes of the bar with a planer from the back of the future handle to the sides of the rectangle drawn on the end. Chamfer the corners and round them off. Using sandpaper, fit the front edge of the handle to the size of the hole in the hammer so that it comes into tension.

    The lines on the end of the handle, which we drew to build a rectangle, will now become marks for the place of the wedges. Take a chisel and make notches on them, so that the notches do not reach the edge of the handle closer than 5 mm, otherwise the wedges can split the handle.

    We drive in wedges crosswise — first wooden and then iron. I use resinous pine for a wooden wedge, it sticks well to a birch handle.

    I do not use any impregnating paintwork materials. I don’t feel comfortable when the handle slides. A new handle mounted on a hammer, including its end parts, is impregnated a couple of times with clean engine oil, with drying a day between layers. The handle of such a hammer does not absorb water, even when left in the rain, the hand does not freeze from it in the cold season, and as a kind of aesthetic addition, it has a beautiful amber color — this staining color of birch is obtained from oil.

    Hello everyone. In today’s project, we do with our own hands
     we will try to make a hammer similar to the hammer from the neurologist’s office. You can, of course, buy a ready-made one, but why buy an expensive rubber hammer if you can make this tool yourself from hot glue sticks ?!

    It’s very simple, cheap and doesn’t take much time.

    So let’s get started!

    Step 1: What you need for the project

    Required materials:
    — 4 sticks of hot glue (30 cm long x 11 mm in diameter)
    — A little water
    — Steel rod with threaded ends
    — Glass pill bottle (the larger the diameter, the larger the hammer …)
    — Soap
    — 2 plastic packages

    Tools (+tools):
    — Hot Glue Gun
    — Wooden Vise
    — 10mm Drill Bit
    — Utility Knife
    — Glass Cup
    — Hammer

    Electric/power tools:
    — Microwave
    — Refrigerator
    — Drill

    Reason for production:
     I need a rubber mallet!
    Precautions:
     ventilated room, leather gloves, goggles
    Cost:
     $2.50
    Qualification:
     basic
    Approximate time:
     3 hours (~60% of which is waiting time).

    Step 2: Heating a glass of water

    Work starts by heating a glass of water. This action will prevent the glass from cracking due to temperature changes, and will also help the hot glue cool more slowly (next step).

    I put a glass of water in the microwave for over a minute. A kettle is also suitable for this operation.

    Step 3: Pour the hot glue into the glass bottle

    Start pouring hot glue into the bottle. Make sure that water does not get inside the bottle through the neck.

    Step 4: Let the hot melt adhesive cool

    Let the hot melt adhesive cool for one hour. After 60 minutes, it will be slightly warm.

    Then I put the bottle in the fridge and (intentionally) forgot about it. This is a good idea, as hot melt adhesive will harden better in the cold.

    Step 5: Break the glass bottle by throwing it on the floor!

    First wrap the bottle in two plastic bags. Then, forcefully drop to the floor. I didn’t get anything right the first time. I had to throw the bottle 5 times for the glass to crack!

    Don’t forget to wear safety goggles, safety is always needed!

    Step 6: CAREFULLY remove the glass

    The hot glue stuck to the glass so badly that I had to use a hammer. Remove glass residue by first putting on leather gloves.

    Step 7: Wash out the hot glue

    Remaining dirt and pieces of glass should be removed. To do this, rinse the resulting workpiece with water, lather, and then rinse again. Next, wipe dry with a towel.

    Step 8: Trim Excess Hot Melt from the Workpiece

    Excess hot melt builds up in the neck of the bottle. Cut them off with a utility knife.

    Step 9: Drilling the handle hole and attaching it

    I clamped the resulting hot glue blank in my wooden vise. Next, I drilled a hole in the center of the workpiece, about ¾ inch (1.9cm) in depth. Insert the hammer handle into this hole.

    Now screw in the handle. It turned out great!

    Sometimes it happens that the usual appearance of instruments quickly becomes boring and is not original in any way, since it does not stand out from the others, which, as usual, looks dull and does not cause any delight. That is why the idea of ​​​​creating a carved hammer handle was undertaken, and how the author made it, I will tell in this article. Before moving on to the process of making a carved handle, you need to decide on the choice of tool, namely, in this case, a hammer, since it is very popular in the workplace of every do-it-yourselfer.

    In order to make a carved handle with your own hands, we need:
    * The hammer itself with a wooden handle, normal, standard, in this case 600 grams.
    * Wood cutters.
    * Office knife.
    * Drill with grinding attachments.
    * Lacquer for wood products.
    * Pencil.

    After making sure that all the details are there, you can start the creative process.

    Step one.
    Armed with a pencil, draw the pattern you want on your handle, in this case a diamond pattern that looks quite original and tasteful.

    After all the markings are ready, you can start cutting the template, the so-called removal of the first layer, we do this with a clerical knife, accurately cutting out a part of the tree along the lines. When working with sharp tools, be careful and do not forget about safety measures, for this it is better to protect your hands with gloves.
    In the process of cutting patterns for more precise end faces, it is better to cut them with more force so as not to leave scratches.

    Step two.
    Next, use the cutters designed for carving in wood, with them you will get a deeper place for the patterns, which will give them more distinctness and will look more effective than a shallow groove. Chinese-made cutters cannot boast of high reliability and resistance to stress, therefore, in the process of cutting, their blades have repeatedly broken, so be on the alert and work with them carefully, as during processing there is a risk of driving the blade into your hand, which is not pleasant. outcome of events.
    After the final work with the cutters, something similar to rhombuses turned out.

    Third step.
    Finishing the patterns is done with a drill and a sanding attachment, after this process, the handle has taken on a more beautiful aesthetic appearance, as well as smooth corners.

    When the work with the drill is completed, smooth the surface with sandpaper, which should be used to clean all sides of the handle.

    Fourth step.
    For added convenience, a hole was made in the handle to place the hammer on a shelf or hang it on a stud next to other tools. We do this with a drill installed in a screwdriver, after grinding this hole and increasing it with a drill.

    Step five.
    The final step is to cover the surface of our carved hammer with a preliminary decorative layer, then varnish it in several layers.

    I made this hammer a couple of years ago. The need was in it because I had to tap every paving slab with it. It softens the blows, something like a rubber mallet. Only a hammer made of rubber does not last long. Since it is not made from rubber, as it should be, at least with the addition of it.

    Of course, you can’t brag about the design, but nevertheless, the quality of such a hammer is good.

    The old mallet (pictured) has fallen into disrepair! The wood has already cracked and dried out from long use. It needed to be replaced with a new one. I drew a model of the future mallet on the computer, printed the picture on paper and set to work.

    Step 1: Materials and tools

    For this project we will need some pieces of wood. This is a great opportunity to use unnecessary wood waste. Many of my acquaintances do not give waste a chance to be useful, they just end up either in the trash or burned like firewood.

    I am not a master carpenter, but I think anyone can make such a hammer.

    You will need:

    1. Saw;
    2. Wood glue;
    3. Some clamps, clamps

    I used a circular saw. I think that with it you can cut pieces of wood the fastest. After cutting, we take sandpaper and clean the sides.

    Step 2: Cut out

    Everyone chooses the size of the mallet at their own discretion. This is not critical. The design of the hammer can also be done by everyone independently and according to their tastes.

    I made my handle length 350mm. Handle width 40 mm. at one end and at the other 30 mm. To achieve such dimensions can be easily when there is a table saw. With a hand saw it will be a little difficult, but everything is real.

    Step 3: Assemble

    Place the handle exactly in the middle of one of the 120x90mm pieces so that 25mm is from the thickest side of the end of the handle. It should peek out a little from the common head of the hammer. Now we glue all the cut off bars with each other (Seen in the photo). Don’t forget to take out the hammer handle, it shouldn’t stick with the hammer.

    Fasten the hammer with clips for better adhesion of all parts of the hammer. In places where the glue has flowed out, remove it. We also clean the glue in the hole where the hammer handle enters. Before complete drying, it is necessary to leave our structure for at least 30 minutes. Something like the layers of a sandwich and seasonings flowing from it. It will, of course, look terrible, but magic will happen in the next steps.

    Step 4: Machining Hammer

    Now that you have the hammer (head) and everything is firmly glued together, it’s time to make it even more beautiful. I made cuts on the hammer handle in order to cut out small indentations after. This will give the convenience of lying the handle in your hand, and then a pleasant work with a mallet.

    Take a pen and cut out the grooves mentioned above. We process the corners of the handle, making them more sloping (rounded). If your handle is too long, cut it off.

    After the work done, insert the handle into the hammer.

    Step 5: Cutting and Finishing

    We process with sandpaper all the bumps on the handle, for a smoother surface and avoid further splinters in the hand. I drilled a hole at the end of the handle so that in the future it would be possible to store it hanging.

    Step 6: Finished Mallet Hammer

    If you wish to stick a pen to your head, you can do so, but I did not do this, it will not go anywhere with me anyway.

    Waiting for your comments, dear friends!

    «Sandpaper» — Big Explanatory Dictionary of the Russian Language — Beesona.

    ru

    Best poems, prose, playcasts and congratulations
    for all authors and connoisseurs of creativity

    Registration
    Login